Celestron NexStar 130SLT Telescope Review

Telescope set up for outdoor observing
Image Credit: Kazuend

The Celestron NexStar 130SLT is a 130mm (5.12-inch) computerized Newtonian reflector combining a relatively short 650mm focal length with a motorized GoTo altitude-azimuth mount. Its f/5 optical system provides useful wide-field capability while the 130mm aperture gathers enough light for the Moon, planets and a good range of brighter deep-sky objects.

The NexStar+ hand controller provides computerized object locating and motorized tracking once the telescope has been aligned. This distinguishes the 130SLT from a conventional manual Newtonian: rather than finding and continually following targets entirely by hand, the mount can slew toward selected objects and track them as Earth rotates.

Its combination of 130mm aperture, relatively wide-field optics and computerized assistance makes the NexStar 130SLT a versatile visual telescope, although the GoTo system adds setup and power requirements that aren’t present with a simple manual reflector.

130mm f/5 Newtonian Optics

The NexStar 130SLT uses a 130mm parabolic primary mirror with a 650mm focal length, giving it a focal ratio of f/5. The relatively short focal length allows wider views than long-focal-length Maksutov-Cassegrain and Schmidt-Cassegrain telescopes of similar aperture.

This makes large open clusters and rich star fields natural targets, while the 130mm aperture provides enough light-gathering ability to explore brighter nebulae, galaxies and globular clusters, particularly from darker observing locations.

The telescope can also be used at higher magnifications for the Moon and planets. As a Newtonian reflector, its mirrors do not produce the chromatic aberration associated with achromatic refractor objectives, although accurate collimation remains important for obtaining the best image quality.

The supplied 25mm and 9mm eyepieces provide magnifications of approximately 26× and 72× respectively.

NexStar GoTo and Tracking

The 130SLT uses a computerized single-fork altitude-azimuth mount controlled through Celestron’s NexStar+ hand controller. Its database contains more than 40,000 celestial objects.

Before GoTo operation can be used accurately, the telescope must first be aligned. Celestron’s SkyAlign procedure allows the observer to center three bright celestial objects without needing to identify those objects beforehand. Other alignment procedures are also available.

Once aligned, an object can be selected using the hand controller and the mount will automatically slew toward its calculated position. The motors can then track the target, reducing the need to continually reposition the telescope as the sky appears to move.

The mount provides sidereal, solar and lunar tracking rates and can be powered by eight AA batteries or an appropriate external 12V power source.

What Can You See Through the NexStar 130SLT?

The Moon is an excellent target, with craters, mountain ranges, maria and smaller features becoming visible as magnification and observing conditions allow.

On the planets, Jupiter’s four Galilean moons are easily accessible and its principal cloud belts can be observed. Saturn’s rings are clearly distinguishable from the planet, Venus displays its phases, and Mars can reveal some surface detail when it is relatively close to Earth and atmospheric seeing is favorable.

The telescope’s 130mm aperture also opens up a useful range of deep-sky observing. Open clusters are particularly well matched to its relatively short focal length, while brighter nebulae, globular clusters and galaxies can also be observed. Dark skies make a substantial difference to the visibility of these fainter objects.

The combination of aperture and a 650mm focal length therefore gives the 130SLT a broader observing range than telescopes designed primarily around narrow-field lunar and planetary viewing.

Setup and Computerized Operation

The optical tube attaches to the mount using a dovetail connection, while the single-fork mount sits on an adjustable stainless-steel tripod. Normal assembly requires no tools.

A StarPointer red-dot finderscope is included to help center alignment stars and other targets. Once the telescope has been assembled, the computerized system still requires an alignment procedure before accurate GoTo operation begins.

The electronics therefore make finding and tracking objects easier once everything is configured, but they don’t eliminate the initial setup process. Observers also need to provide the mount with electrical power whenever computerized slewing and tracking are required.

Limitations to Consider

The NexStar 130SLT’s computerized mount introduces more complexity than a manual Dobsonian or altazimuth telescope. GoTo accuracy depends on completing the alignment procedure correctly, and motorized operation requires a reliable power supply.

The telescope’s Newtonian optics also require occasional collimation. Its f/5 optical system is relatively forgiving compared with very fast Newtonians, but maintaining proper mirror alignment remains part of owning a reflector telescope.

Although 130mm of aperture provides useful deep-sky capability, faint galaxies and nebulae remain highly dependent on dark skies. The telescope should not be expected to reproduce the colorful, highly detailed appearance of long-exposure astronomical photographs.

The altitude-azimuth mount is well suited to visual observing and basic lunar or planetary imaging, but it is not designed as a long-exposure deep-sky astrophotography platform, where field rotation and mount performance become important limitations.

Who Is the NexStar 130SLT Best For?

The NexStar 130SLT is best suited to observers who want a versatile 130mm reflector with computerized help finding and tracking objects. Its short 650mm focal length makes it useful for wider star fields and brighter deep-sky targets while still providing worthwhile lunar and planetary views, making it a good fit for someone who values a broad range of visual observing rather than specializing in one type of target.

Specifications

  • Optical Design: Newtonian reflector
  • Primary Mirror: Parabolic
  • Aperture: 130mm (5.12 inches)
  • Focal Length: 650mm
  • Focal Ratio: f/5
  • Optical Tube: Aluminum
  • Optical Tube Length: 635mm (25 inches)
  • Optical Tube Weight: 8.8 lb (3.99 kg)
  • Mount: Computerized single-fork altitude-azimuth
  • GoTo Database: More than 40,000 objects
  • Tracking Rates: Sidereal, solar and lunar
  • Supplied Eyepieces: 25mm and 9mm
  • Supplied Magnifications: 26× and 72×
  • Finder: StarPointer red-dot finderscope
  • Tripod: Adjustable stainless steel
  • Power: 8 AA batteries or 12V DC external supply